SKU: HL.1341904
UPC: 665760908494. 3.5x5.0x3.0 inches.
Radius goes far beyond traditional ring modulation. With precise control over the balance and frequency ratios of both sidebands, you'll have more advanced control than with any ring mod that has come before. Organic, complex harmonic structures, bell-like tones, metallic textures, frequency shifting, soft tremolo, and bubbly phaser sounds are all on tap. Pitch tracking, a push-to-tune footswitch, and picking dynamics make it responsive and predictable in concert. In the studio, Radius has well-spaced controls for tabletop use and a full MIDI implementation for DAW integration. The 24-bit 96 kHz codec, audiophile op amps and stereo input/output make it equally at home in the studio or control room. Radius is a musical ring modulator and frequency shifter that lets you modfy the timbre of your instrument in new ways. With a multi-waveform LFO, step modulator, and MIDI-playable carrier oscillator, Radius modernizes classic electronic techniques for the future. Features: • Stereo ring modulator and frequency shifter • Continuous mix between ring modulation and frequency shifting • Selectable 2X frequency ratios for upper and lower sidebands • Frequency shifting with feedback • Three carrier frequency ranges (low, high, quantized) • Carrier frequency pitch tracking (monophonic, +/- 100%) • Pust-to-tone carrier oscillator • MIDI-playable carrier oscillator • Multi-waveform LFO (triangle, square, random, intelligent random, X mod +/-) • Step modulator (1-8 steps), programmable via front panel • Tap tempo and MIDI clock sync • Envelope follower • Envelope-triggered LFO (one-shot ramp, pulse, random, step mod) • Configurable AUX switch (tap, tune, preset, LFO) • USB and TRS MIDI • Full MIDI implementation • 96 kHz sampling rate • Web editor with preset upload/download • User-installable firmware updates (USB) Designed and assembled in USA. Requires a 9V DC 250 mA power supply (not included).
SKU: HL.1117964
UPC: 847986002129. 7.0x10.25x4.25 inches.
Please note: although we don't keep stock on hand, this item will drop ship direct from the manufacturer at the time of your order. Two switchable sound characteristics, AIR and FLAT. The 140 AIR has two sound characteristics, AIR and FLAT. AIR delivers an open, sparkling character which is the right choice if you need great sound without spending time on post-production. FLAT provides a linear frequency response for âÂÂas-it-isâ reproduction of drums, strings, acoustic guitars, and choirs. It is perfect if you aim for realistic sonic images. The best stereo matching you can get. LEWITT has one of the most precise matching processes in the industry. The difference between the two mics of a stereo pair is inaudible. How come? The frequency response and sensitivity of every single microphone is measured. A measurement system controls the polarization voltage of the capsule to adjust the sensitivity, so it is the same for all LCT 140 AIR. Then, an algorithm compares the measured frequency response of each microphone and finds the perfect pairs. Excellent transient response and full flexibility on all instruments Transients are the DNA of your instrument's sound. To retain the natural musicality of your instruments, the LCT 140 AIR delivers an excellent transient response. To be prepared for all eventualities, the LCT 140 AIR has a low-cut and a PAD. You won't break a sweat with loud sources, nor will you have to deal with low-frequency noise when you don't want to. The LCT 140 AIR is great for: Acoustic Guitar Drums Strings Choirs Piano Ukulele Durable and light aluminum housing The LCT 140 AIR is very durable yet lightweight thanks to its CNC'ed aluminum housing. Positioning and setup become easy tasks. What's in the box? The 140 AIR Stereo Pair comes with two snap-in mic clips, a transport bag with two pockets, and two windscreens.
SKU: HL.1753729
UPC: 850035900062. 8.25x22.25x16.5 inches.
The SF-24 stereo ribbon microphone is a phantom-powered version of our popular SF-12 stereo ribbon microphone. It combines the SF-12's high-quality audio performance, outstanding stereo separation, and imaging with our exclusive active electronics system for ribbon microphones. The SF-24's output of -38 dB is a full 14 dB more sensitive than our non-powered SF-12, putting its sensitivity on par with that of phantom powered condenser microphones. The unique electronics and custom-designed FET's used in the SF-24 allow for ultra-quiet operation, with self-noise of lower than 18 dB. Like an SF-12, the SF-24 is actually two matched ribbon microphones placed one above the other in a coincident pair, each aimed 45 degrees from center in the classic Blumlein configuration. The magnet/pole piece structure of each ribbon transducer delivers a wide, uniform frequency response with no substantial peaks or dips, and the 1.8-micron ribbons produce superb transient response. Frequency response is excellent regardless of the angle of sound striking the ribbons and off-axis coloration is negligible. The SF-24's extension cable comes with a Y adapter that splits into separate 3-pin male XLR connectors labeled “Upper” and “Lower” for the upper and lower capsules of the microphone (when held vertically). Features: • Phantom powered circuitry provides high output and impedance matching • True stereophonic (Blumlein and M-S) recording from one microphone • High SPL capabilities • No distortion up to maximum SPL rating • Extremely low residual noise • Ribbon elements are not affected by heat or humidity • Absence of high frequency phase distortion • Equal sensitivity from front or back of elements • Consistent frequency response regardless of distance • High efficiency, matching toroidal transformers • Very low magnetic leakage.
SKU: HL.1433354
UPC: 860006446802. 11.75x13.5x18.25 inches.
Kali Audio's LP-6 V2 is a 6.5-inch studio monitor. It was designed to deliver transparent sound for creators working across genres and formats at a price that puts it within anyone's reach. An advanced waveguide, a large voice coil, and precision tuning make the sound extraordinarily transparent, while the oversized low frequency magnet and low noise port tube deliver powerful, clean bass response. To make it easy to navigate into your setup, the speaker is self-powered and has a variety of inputs. The DSP features Boundary EQ settings that optimize the speaker's response for where it's placed in your listening space. New in the 2nd Version is an improved amplifier platform that offers lower noise, higher sensitivity, and smoother high-frequency response. The Boundary EQ settings have been updated based on user feedback, and the low-frequency driver cone has less mass for more consistent response.
SKU: HL.1433355
UPC: 860004163886. 12.75x14.0x20.75 inches.
Kali Audio's LP-8 V2 is an 8-inch studio monitor. It was designed to deliver transparent sound for creators working across genres and formats at a price that puts it within anyone's reach. An advanced waveguide, a large coil, and precision tuning make the sound extraordinarily transparent, while the oversized low frequency magnet and the low noise port tube deliver powerful, clean bass response. To make it easy to integrate into your setup, the speaker is self-powered and has a variety of inputs. The DSP features Boundary EQ settings that optimize the speaker's response for where it's placed in your listening space. New in the 2nd Version is an improved amplifier platform that offers lower noise, higher sensitivity, and smoother high-frequency response. The Boundary EQ settings have been updated based on user feedback, and the low-frequency driver cone has less mass for more consistent response.
SKU: HL.1117960
ISBN 9781705180907. UPC: 847986002051. 6.75x10.0x4.0 inches.
Please note: although we don't keep stock on hand, this item will drop ship direct from the manufacturer at the time of your order. Well-balanced sound with pleasant high-end. The LCT 040 MATCH stereo pair provides professionally refined sound right from the moment you hit the “record†button. The tailored small diaphragm condenser capsule with its well-balanced frequency response gets you professional results in no time. About the matching process. LEWITT measures the frequency response and sensitivity of all their mics. The measurement system controls the polarization voltage of the capsule to adjust the sensitivity, so it is the same for all LCT 040 MATCH. An algorithm compares all measured frequency responses and puts together the perfect pairs for flawless stereo recordings. Easy drum recordings. Transients are the DNA of your instrument's sound. To retain the natural musicality of your instruments, the LCT 040 MATCH delivers an excellent transient response. You will get a punchy and precise reproduction of your drum kit's unique sound. Made for acoustic guitar recordings With its fast transient response, the LCT 040 MATCH makes your acoustic guitar sound more crisp and defined than ever. What you get is a mic for guitar recordings with fast attack and a sound that cuts through the mix. What's in the box? The LCT 040 MATCH stereo pair comes with two snap-in mic clips, two windscreens, and a transport bag with two compartments.
SKU: HL.1117961
ISBN 9781705180914. UPC: 847986002075. 6.5x6.5x4.0 inches.
Please note: although we don't keep stock on hand, this item will drop ship direct from the manufacturer at the time of your order. Well-balanced sound with pleasant high-end. The LCT 040 MATCH stereo pair provides professionally refined sound right from the moment you hit the “record†button. The tailored small diaphragm condenser capsule with its well-balanced frequency response gets you professional results in no time. About the matching process. LEWITT measures the frequency response and sensitivity of all their mics. The measurement system controls the polarization voltage of the capsule to adjust the sensitivity, so it is the same for all LCT 040 MATCH. An algorithm compares all measured frequency responses and puts together the perfect pairs for flawless stereo recordings. Easy drum recordings. Transients are the DNA of your instrument's sound. To retain the natural musicality of your instruments, the LCT 040 MATCH delivers an excellent transient response. You will get a punchy and precise reproduction of your drum kit's unique sound. Made for acoustic guitar recordings. With its fast transient response, the LCT 040 MATCH makes your acoustic guitar sound more crisp and defined than ever. What you get is a mic for guitar recordings with fast attack and a sound that cuts through the mix. What's in the box? The LCT 040 MATCH stereo pair comes with two snap-in mic clips, two windscreens, and a transport bag with two compartments.
SKU: HL.1433353
UPC: 860004163862. 12.0x13.5x18.5 inches.
Kali Audio's LP-6 V2 is a 6.5-inch studio monitor. It was designed to deliver transparent sound for creators working across genres and formats at a price that puts it within anyone's reach. An advanced waveguide, a large voice coil, and precision tuning make the sound extraordinarily transparent, while the oversized low frequency magnet and low noise port tube deliver powerful, clean bass response. To make it easy to integrate into your setup, the speaker is self-powered and has a variety of inputs. The DSP features Boundary EQ settings that optimize the speaker's response for where it's placed in your listening space. New in the 2nd Version is an improved amplifier platform that offers lower noise, higher sensitivity, and smoother high-frequency response. The Boundary EQ settings have been updated based on user feedback, and the low-frequency driver cone has less mass for more consistent response.
SKU: HL.1176265
UPC: 841300102366. 26.25x31.0x26.25 inches.
The XPRS2 Series couples the versatility and mobility of the original XPRS Series with elevated sound-performance and audio intelligibility to deliver a high-caliber speaker system for mobile DJs, live sound, houses of worship, rental and fixed installations. KEY FEATURES Powerful Class D Amplification The XPRS2 Series employs Class D Amplification with high output wattage for a powerful and premiere audio experience for performances and listeners alike. The XPRS102 and XPRS122 full-range speakers feature CLass D 2000 W amplification, while the XPRS1152S and XPRS1182S subwoofers offer Class D 4000 W amplification. High Quality, Robust Build Pioneer DJ's all-new XPRS2 Series features a sleek, all-black, protective pollywood cabinet for performance in harsh outdoor and indoor environments. The series models all come with a durable handle to support system portability and handling during setup and take down. The XPRS2 Series also features rubber feet to create separation and shock absorption between surfaces. Three DSP Modes Both of the XPRS2 full-range speakers contain three different DSP preset modes–Boost, Extended LF, and Normal–to suit different listening environments. Accurate Audio Performance / Frequency Response The XPRS1152S relies on an 18″ ferrite woofer with a 3″ voice coil with long excursion to produce low frequencies with paramount accuracy. Offers a 40 Hz - 120 Hz frequency response and 130 dB maximum SPL; the subwoofers pack in the performance of a permanent install subwoofer with the compact mobility required by today's mobile artists, performers and venues.
SKU: HL.1753727
UPC: 850035900024. 8.25x22.25x16.25 inches.
The R-122V is the pinnacle of our R-Series line, a world-class tube ribbon microphone exhibiting unparalleled richness, depth, and detail, particularly in the midrange frequencies. With a lushness that has to be heard to be truly appreciated, the R-122V offers the ultimate in ribbon microphone performance for those who insist on the very best. The R-122V takes the Royer-pioneered concept of active ribbon microphone technology to an unprecedented level by incorporating vacuum tube electronics into the same proven transducer system used in the venerable R-121 and R-122 ribbon microphones. The high operating voltage of the vacuum tube provides headroom far beyond that available from a standard phantom power supply. Sonically this translates into unmwatched clarity, detail, and airiness, along with the ability to handle brute SPL levels without flinching. Features: • Vacuum tube electronics provide high output capacity, optimal impedance to the ribbon element and low output impedance • Extremely low self-noise • Operates from a dedicated power supply • High SPL capabilities for electric guitar and percussion instruments • Absence of high-frequency peaks, “ringing” and phase shifts • Ribbon element, unaffected by impedance/load, heat or humidity • Very low magnetic leakage • Equal sensitivity from front or back of element • Consistent frequency response regardless of distance • Rear side of mic records slightly brighter when three feet or closer to sound source.
SKU: HL.1176264
UPC: 841300102359. 24.0x27.0x22.25 inches.
The XPRS2 Series couples the versatility and mobility of the original XPRS Series with elevated sound-performance and audio intelligibility to deliver a high-caliber speaker system for mobile DJs, live sound, houses of worship, rental and fixed installations. KEY FEATURES Powerful Class D Amplification The XPRS2 Series employs Class D Amplification with high output wattage for a powerful and premiere audio experience for performances and listeners alike. The XPRS102 and XPRS122 full-range speakers feature CLass D 2000 W amplification, while the XPRS1152S and XPRS1182S subwoofers offer Class D 4000 W amplification. High Quality, Robust Build Pioneer DJ's all-new XPRS2 Series features a sleek, all-black, protective pollywood cabinet for performance in harsh outdoor and indoor environments. The series models all come with a durable handle to support system portability and handling during setup and take down. The XPRS2 Series also features rubber feet to create separation and shock absorption between surfaces. Three DSP Modes Both of the XPRS2 full-range speakers contain three different DSP preset modes–Boost, Extended LF, and Normal–to suit different listening environments. Accurate Audio Performance / Frequency Response The XPRS1152S employs a 15″ ferrite woofer with a 3″ voice coil with long excursion to produce low frequencies with paramount accuracy. Providing a frequency response of 45 Hz - 120 Hz and a maximum SPL of 129 dB; the subwoofers pack in the performance of a permanent install subwoofer with the compact mobility required by today's mobile artists, performers and venues.
SKU: HL.1753726
UPC: 850035900130. 7.25x14.25x5.5 inches.
In 2022, we introduced the R-11, the world's first phantom powered, active ribbon™ microphone. It was a revolutionary development in ribbon mics, combining impedance matching circuitry with condenser-like output levels that allowed the R-122 to be used on even the quietest sound sources. It also allowed the mic to be paired to virtually any preamplifier. The R-122 MKII takes the R-122 to a whole new level, delivering unprecedented flexibility for ribbons via the addition of a switchable -15 dB pad and a switchable bass-cut filter. The switches are completely cut out of the circuit when disengaged so when both are off, the microphone is for all purposes an original R-22. The switches are located on the back of the microphone and recessed to prevent accidental activation. Features: • Phantom powered circuitry provides high output and impedance matching • -15 dB pad before the mic's electronics gives more headroom when activated • Bass cut filter reduces proximity effect and bass below 100 Hz when activated • High SPL Capabilities • No distortion up to maximum SPL rating • Extremely low residual noise • Ribbon element is not affected by heat or humidity • Absence of high frequency phase distortion • Equal sensitivity from front or back of element • Consistent frequency response regardless of distance • Rear side of mic records slightly brighter when three feet or closer to sound source.
SKU: HL.365006
UPC: 810100410377. 7.0x12.5x4.25 inches.
The Heil PR77D is a professional quality dynamic microphone for use in commercial broadcast, podcasting, and studio or home recording. It is perfect for any application that requires a smooth, flat response over a wide frequency range, excellent transient response, great speech articulation, and low intermodulation distortion (IMD). The PR77D achieves its exceptional performance via a large, 1-inch, low-mass voice coil encompassed by a powerful magnet structure using a mixture of neodymium, iron, and boron. Special attention has been paid to the phasing plug assembly to provide exceptional 180-degree, off-axis rear rejection of over -40 dB. Simultaneously, the front pattern allows the user to move about freely in front of the element with no change in response. Unique to the PR77D is a two-position switch allowing the user to select optimal response frequency characteristics between Voice and Music applications. The Voice position rolls the audio off at 120Hz at -6 dB per octave, whereas the Music position removes the filter and uses the entire audio spectrum of 60Hz to 16kHz. The PR77D is designed to be used exclusively with booms or bases and has standard 5/8″ – 27 microphone stand threads.
SKU: HL.1753728
The SF-12 stereo coincident ribbon microphone combines high quality audio performance with outstanding stereo separation and imaging. It is a modern ribbon design with no audible diffraction effects or cavity resonance. An SF-12 is actually two matched ribbon microphones placed one above the other; each aimed 45 degrees from center in the classic Blumlein configuration. The frequency response is excellent regardless of the angle of sound striking the ribbons and off-axis coloration is negligible. The SF-12 utilizes two 1.8-micron ribbons, each weighing approximately 1/3 milligram and producing superb transient response. The two ribbon transducers are magnet/pole piece structures that produce a wide, uniform frequency response with no substantial peaks or dips. The case is ingot iron and forms part of the magnetic return circuit, an effective system with low leakage flux which accounts for the relatively high sensitivity in a trim package. The SF-12's extension cable comes with a Y adapter that splits into separate 3-pin male XLR connectors labled âUpperâ and âLower,â for the upper and lower capsules of the microphone (when held vertically). The SF-12 is uncanny for creating âyou-are-thereâ stereo recordings that capture not only the instrument being recorded, but, depending on positioning, the acoustic environment as well. If you pay carefull attention to the sound of an instrument or ensemble in the recording environment, you will likely find a place where it sounds best to you. Position the SF-12 in that place and you will capture that sound.
SKU: HL.364993
UPC: 810100410223. 4.75x11.25x3.25 inches.
The Heil PR30B represents completely original dynamic microphone technology designed for a wide range of professional applications such as sophisticated recording, live sound, and commercial broadcast. Its smooth, wide frequency range sounds like a ribbon but can withstand large amounts of SPL. Outperforming the tired, 30-year-old technology of the industry, the large diameter of the Heil PR30B's dynamic element produces an outstanding upper mid-range that makes the PR30B an ideal guitar microphone as well as an excellent choice for reproducing the human voice. The pattern control of the Heil PR30B dynamic microphone is outstanding. This exceptional performance is achieved by using the ideal combination of materials for the large low-mass diaphragm and a special mixture of neodymium, iron, and boron that gives the Heil PR30B mic the strongest magnet structure available. These features allow the microphone to achieve magnificent dynamic range. A unique screen system using two different diameter mesh screens and an internal breath blast filter allow the user to talk closely to the microphone with little worry of pops or excessive sibilance. The Heil PR30B's large diameter dynamic element is mounted in a unique sorbothane shock mount atop a non-resonant fixture, decoupling the element from the massive steel body. This body and the internal humbucking coil removes any worry of using the PR 30B near monitor screens or noisy lighting fixtures and controls. The new technology of the Heil PR30B has redefined the dynamic mic with superior wide frequency response, low presence of noise, flawless design, and elite quality expected by an innovator and leader in the field.
SKU: HL.1105208
UPC: 663961058666. 17.5x18.5x30.0 inches.
SRT212 - 12″ 1600W Professional Powered Loudspeaker SRT™ Professional Powered Loudspeakers are designed for real-world working musicians, DJs, events, venues, and beyond. The latest acoustic processing technology, powerful amplifiers, and the ultra-versatile SRT Mix Control™ means easy setup, incredible sound, and unbeatable reliability. Built-Like-A-Tank™ construction features rugged molded cabinets and tough steel grilles that are built to last. As the larger gigs come rolling in, your audience gets bigger, and your needs demand better sound and flexibility, SRT is YOUR Next Big Thing. • A True Workhorse for Gigging Professionals • Powerful 1600W Class-D amplifiers designed for ultra-reliable, consistent performance • Custom high-efficiency transducers ensure maximum clarity and accuracy • Built-Like-A-Tank™ to conquer every gig while lightweight for easy loading • Universal Power Supply (100-240VAC) with Power Factor Correction for stable operation even with unstable AC power • Advanced Impulse™ DSP - Proprietary Acoustic Tuning • Crystal clear sound across the entire dispersion zone means the whole room is the sweet spot • Custom Sym-X™ Horn • Allows for total efficiency from the HF transducer minimizing distortion and increasing output • Creates a perfectly symmetrical, flat response at the crossover point for exceptionally smooth midrange • The horn-loading frequency is set below the HF drivers' LF capability allowing for maximum efficiency and optimal performance at the crossover point • Transparent System Limiting and Protection • Dedicated processing module monitors and protects the amplifier in real time • Sound quality and tonal balance is maintained even under heavy limiting • Utilizing powerful multi-band compression, the amplifier can target specific frequency ranges to prevent the system from being overloaded rather than turn everything down at the expense of overall output • Input limiting keeps your source signal in check so if you're sending audio that's a bit too hot, the speaker will cool it down • SRT Mix Control™ Built-in 4-Channel Digital Mixer with Bluetooth® • Dual independent channels that support mic, line, and instrument signals • Dedicated 1/8″ stereo aux channel • Stream music from any Bluetooth® enabled device • Complete Wireless Control via the SRT Connect™ App • Wirelessly link SRT speakers together for music streaming applications plus complete control over both speakers • Versatile configuration options • Step up your low-end with the SR18S Powered Subwoofer.
SKU: HL.1329342
6.15x12.75x2.811 inches.
High-definition monitoring for all... There's a reason all of today's highest-end studio monitors are adding active room correction – it supercharges their performance and ensures mixes translate flawlessly. ARC Studio offers this same massive boost in performance and accuracy to every monitor in every studio. Dramactically improve your mixing accuracy Your room has a big impact on how you hear your music. The size, shape, materials, and furniture all work to distort the frequency and stereo balance of your monitors, degrading your sound. ARC Studio analyzes and corrects these issues in minutes. Your music snaps into focus, with more controlled low-end, tighter transients and pinpoint stereo imaging. It's like an instant upgrade to your monitors. And when you can trust what you hear, you'll mix faster and more confidently than ever. Installs in minutes ARC Studio combines the new ARC 4 measurement software, room analysis microphone and stand-alone correction processor. Plug the mic into your interface and you'll be guided through measuring acoustical spots within your listening position. IK's award-winning ARC technology uses this 3D snapshot to identify and completely correct all the problematic issues degrading your monitors' performance. This correction profile is loaded into the ARC Studio processor, sitting invisibly between your interface and monitors to apply all incoming signals. Acoustic issues disappear, unleashing your monitors' true performance. Correct every studio For pro studios, whether in-the-box or console-based, ARC Studio allows for a sonically transparent correction and custom-tuning for any monitoring setup from nearfields to mains, preserving the inherent system's sonic quality. And for DAW-based studios, ARC Studio frees you from the hassle of inserting plug-ins on the master bus of your work and preserves zero-latency monitoring setups, plus allows you to listen to your preferred streaming service with acoustically corrected monitoring without messing around with system drivers. You can create a profile for every configuration, listening position or even monitor pair. Whether you're in a makeshift studio or a world-class one, fine-tuning your monitoring to your taste has never been easier and has never sounded so good. Includes monitor emulations ARC Studio also includes a monitor emulations function that turns your monitor system into iconic studio monitors and popular hi-fi speakers and mobile devices, with breathtakingly true-to-life results by accurately reproducing the frequency and phase response of the originals. With over 20 profiles included, a single pair of monitors now lets you test your mix on different reference systems quickly, without ever having to head to your car! For Every Studio • Compact digital room correction processor • High-end audio conversion • Full-range correction for any ki.
SKU: HL.365007
UPC: 810100410384. 7.0x4.0x12.5 inches.
SKU: HL.1117985
UPC: 847986000859. 8.25x10.0x7.25 inches.
Please note: although we don't keep stock on hand, this item will drop ship direct from the manufacturer at the time of your order. Exceptional sound for bass drums and other bass-heavy instruments The DTP 640 REX is a dual-capsule microphone specifically designed to capture the sound of your drums and percussion instruments. It features two phase-aligned capsules, a condenser and a dynamic one. Both capsules can be adjusted to emphasize your sound for studio and live applications. Dual-capsule bass drum microphone The DTP 640 REX features two phase-aligned microphones in a single housing. The dynamic side ensures accurate attack reproduction of the bass drum, while the condenser element captures more of the body resonance and decay. Each element has a dedicated output. This enables you to shape the bass drum sound in unique ways. Three switchable sound characteristics =//= Both elements with neutral frequency response. +//= Dynamic element boosts frequencies between 3 and 5 kHz; condenser stays neutral. +//+ Dynamic boosts the range of 3-5 kHz, condenser boosts frequencies 70-150 Hz to deliver full-bodied sound. Great on all kinds of bass-heavy instruments With the DTP 640 REX you get massive yet clear bass drum and bass recordings, in the studio and on stage. Both capsules, dynamic and condenser, are specifically designed to replicate low frequencies with precision and punch.
SKU: HL.50603681
UPC: 840126952995.
Waves of sound, water or light behave similarly. Waves move through a substance with a certain frequency or energy. Waves interfere with each other and new structures are shown. The combination of frequencies gives every sound a unique audible quality.
SKU: HL.3710617
UPC: 697643102736. 17.0x17.0x0.047 inches.
Forged from a proprietary bronze developed specifically for cymbals, handcrafted from start to finish by highly skilled Swiss craftsmen, conceived and executed according to uncompromising sound concepts, Signature Cymbals are instruments of unsurpassed quality for the discerning drummer's quest for personal creativity and musical excellence. Alloy: Proprietary Signature Bronze Weight: thin Volume: soft to medium Stick Sound: washy Intensity: fast, lively Sustain: medium Bell Character: integrated Sound Character: Dark, transparent, warm. Loose frequency range, very complex mix. Very sensitive, soft response and feel. Suitable for light ride playing in larger sizes.
SKU: HL.428285
UPC: 841300100867. 10.25x10.25x4.25 inches.
Closed-back Circumaural DJ Headphones with 50mm Drivers, with 5Hz-40kHz Frequency Range, Detachable Cable, and Carrying Case - Black.
SKU: HL.1461573
UPC: 841300102472. 20.0x20.5x32.25 inches.
DSP Modes The XPRS82 and XPRS152 feature four DSP modes including Live, Music, Speech, and Monitor. 16 Customizable User DSP Modes In addition to the four presets, each XPRS2 full-range speaker includes 16 custom usre DSP modes – which can be saved with custom names – to ensure the EQ settings are maximized for every scenario. XPRS152 Full-Range Speaker Design The larger of the XPRS2 Series, the XPRS152 full range speaker, features a 15″ woofer with a 3″ voice coil and a 1″ exit compression driver with a 1.75″ voice coil for superb sound coverage across mid to large venues and audiences. With a frequency response of 45Hz -20 kHz and a maximum SPL of 133 dB, the versatile full-range speaker delivers powerful sound built to thrive in even the harshest of sound environments, such as a live DJ set or concert.
SKU: AP.49400
ISBN 9781470647407. UPC: 038081566641. English.
The ability to experience thankfulness and joy can be developed, and the practice of keeping a gratitude journal will help. This guided process of self-reflection invites educators to focus on the positive aspects of being a teacher, musician, and human being. The flexible format allows for entries on any schedule or frequency. It's a personal resource that will remind you what's truly important and inspire positive change in your life and work. Includes inspiring quotes, habit trackers for gauging progress, and simple yet insightful writing prompts that lead you to express appreciation, reflect on your teaching, and ignite the joy of making music.
SKU: HL.3710618
UPC: 697643102743. 18.0x18.0x0.097 inches.
Series Description: Forged from a proprietary bronze developed specifically for cymbals, handcrafted from start to finish by highly skilled Swiss craftsmen, conceived and executed according to uncompromising sound concepts, Signature Cymbals are instruments of unsurpassed quality for the discerning drummer's quest for personal creativity and musical excellence. Sizes: 16″, 17″, 18″, 20″ Volume: Soft Weight: Light Sound character: Dark, transparent, warm. Loose frequency range, very complex mix. Very sensitive, soft response and feel. Suitable for light ride playing in larger sizes.
SKU: KJ.SO213C
UPC: 8402701421.
The title refers to the 3rd degree of a scale, which refers to F-sharp and F-natural in Mr. Stephan's composition. Thirds A Plenty is in ternary form and all instruments have opportunities for melodic work. It is correlated with Artistry in Strings, Book I, Unit II.
About Artistry in Strings
Artistry in Strings is a groundbreaking string method that will be at home in your classroom or private studio. Its comprehensive approach contains all the basic tools necessary to establish solid technique and expressive music making. Artistry in Strings is a music educator's dream, combining a performance-centered approach with optional theory, composing, listening, assessment, and interdisciplinary and multi-cultural studies.Authors Robert S. Frost, Gerald Fischbach, and Wendy Barden have combined their vast experience as educators to provide a string method that is well paced for all types of beginning string classes. Regardless of class frequency and duration, or class size and student age, Artistry in Strings will assist you to achieve superior results.
SKU: HL.1461572
UPC: 841300102465. 14.25x15.25x21.5 inches.
DSP Modes The XPRS82 features four DSP modes including Live, Music, Speech, and Monitor 2. 16 Customizable User DSP Modes In addition to the four presets, each XPRS2 full-range speaker includes 16 custom user DSP modes – which can be saved with custom names – to ensure the EQ settings are maximized for every scenario. XPRS82 Full-Range Speaker Design The XPRS82 features an 8″ woofer with a 2″ voice coil and a 1″ exit compression driver with a 1.75″ voice coil for excellent audio performance. With a maximum sound pressure level (SPL) of 127 dBand frequency response of 60 Hz -20 kHz, the XPRS82 is built to ensure all audio, including music and spoken word, are reproduced as accurately as possible.
