After Later Audio Fuse; Eurorack module; Meta-Modulator for mixing and blending of two audio signals related to 9 different algorithms: Crossfade, Crossfolding, Diode ring-modulation, digital ring-modulation. XOR modulation and 3 Vocoder modes; Timbre control knob for modulation intensity between in...(+)
After Later Audio Fuse; Eurorack module; Meta-Modulator for mixing and blending of two audio signals related to 9 different algorithms: Crossfade, Crossfolding, Diode ring-modulation, digital ring-modulation. XOR modulation and 3 Vocoder modes; Timbre control knob for modulation intensity between input 1 & 2; zwo audio inputs with level control knobs; CV control over algorithm selection and timbre; switchable internal modulation oscillator; power consumption: 110mA (+12V) / 5mA (-12V); width: 10 HP; depth: 25 mm
Segment Generator- ASR envelope, complex 6-step envelope, LFO or 4-step sequence- The gate inputs are used to configure the grouping of the segments (cable plugged in or not)- Flexible segment grouping possible: complex 6-stage envelope, 6 individual envelopes or 3+3, 2+4 etc.- Gate output for each ...(+)
Segment Generator- ASR envelope, complex 6-step envelope, LFO or 4-step sequence- The gate inputs are used to configure the grouping of the segments (cable plugged in or not)- Flexible segment grouping possible: complex 6-stage envelope, 6 individual envelopes or 3+3, 2+4 etc.- Gate output for each stage when used as a multi-segment envelope- Three different segment types: Ramp, Hold, Step- Looping of individual segments or segment groups- Segment duration: 1ms to 16s- Up to six modules can be linked through a connector on the back of the module- Power consumption: 80mA (+12V) / 20mA (-12V)- Width: 14 TU- Depth: 25 mm
Mixer / Crossfader / Wavefolder- Two signal inputs with crossfader- Crossfader between input section and wavefolder output- Wavefolder with adjustable number of signal folds and crossfader between even and odd harmonics- CV inputs for all parameters- Two signal outputs (pre and post-wavefolder)- Can...(+)
Mixer / Crossfader / Wavefolder- Two signal inputs with crossfader- Crossfader between input section and wavefolder output- Wavefolder with adjustable number of signal folds and crossfader between even and odd harmonics- CV inputs for all parameters- Two signal outputs (pre and post-wavefolder)- Can be combined with other modules of the COCO system (Canyon, Brooks, Cascades)- Two toggle switches for distributing pitch and sync signals between oscillators within a COCO system- Power consumption: 45mA (+12V) / 45mA (-12V)- Width: 8 U- Depth: 25 mm
Macro Oscillator- 16 Synthesis modes - virtual analog dual VCO, FM, additive oscillator, wavetables, Karplus Strong, drums and more- 3 Editable parameters per algorithm: harmonics, timbre and morph- Pitch control with coarse, fine and octave mode- CV inputs for FM, timbre and morph, each with bipola...(+)
Macro Oscillator- 16 Synthesis modes - virtual analog dual VCO, FM, additive oscillator, wavetables, Karplus Strong, drums and more- 3 Editable parameters per algorithm: harmonics, timbre and morph- Pitch control with coarse, fine and octave mode- CV inputs for FM, timbre and morph, each with bipolar attenuator- CV inputs for harmonics, model (algorithm selection), level (VCA) and pitch (1 V/oct.)- Trigger input for integrated decay envelope with lowpass filter- 2 Audio outputs- Current consumption: 50 mA (+12 V) / 5 mA (-12 V)- Width: 12 HP- Depth: 25 mm
After Later Audio Dice; Eurorack module; Random Gate and CV Generator; t-section with 3 gate/trigger outputs, driven by internal or external clock; 2 gate/trigger outputs with selectable random algorithms (random coin toss, random ratcheting, random beats) and adjustable jitter; X-section with 3 cha...(+)
After Later Audio Dice; Eurorack module; Random Gate and CV Generator; t-section with 3 gate/trigger outputs, driven by internal or external clock; 2 gate/trigger outputs with selectable random algorithms (random coin toss, random ratcheting, random beats) and adjustable jitter; X-section with 3 channels of random voltages, driven by the outputs of the t-section or external clock; random voltages can be smooth, stepped or quantised; memory locations for 6 scales; Spread control, Bias control and 3 selectable modes influence the generated random voltages; Y-output for an independent fluctuating random voltage; Deja Vu section: looper for past events with the possibility to add new random events to the data loop; CV inputs for all parameters; power consumption: +80mA (+12V) / -20mA (-12V); width: 18 HP; depth: 25mm
Tidal Modulator - works as LFO, VCO, AD- and AR-envelope- Frequency range: 2 min - - 2 kHz (expandable via CV offset)- V/Oct tracking and exponential FM- Shape and slope controls to control segment times and waveforms- Smoothing or waveshaping of the output signal possible- All parameters CV control...(+)
Tidal Modulator - works as LFO, VCO, AD- and AR-envelope- Frequency range: 2 min - - 2 kHz (expandable via CV offset)- V/Oct tracking and exponential FM- Shape and slope controls to control segment times and waveforms- Smoothing or waveshaping of the output signal possible- All parameters CV controllable- 4 Independent outputs with different operating modes, e.g. for phase-shifted function generators, polyrhythmic LFOs and much more- Trigger input for AD / AR modes and LFO reset- Clock input for PLL mode- Power consumption: 50 mA (+12 V) / 20 mA (-12 V)- Width: 14 U- Depth: 25 mm
Subharmonic generator- Separate sections for generating odd and even subharmonics- 4 Controls per section for subharmonics, signal input and output- Mix output with level control and odd/even crossfader with CV input- Reset button and trigger input- Can be combined with other modules of the COCO sys...(+)
Subharmonic generator- Separate sections for generating odd and even subharmonics- 4 Controls per section for subharmonics, signal input and output- Mix output with level control and odd/even crossfader with CV input- Reset button and trigger input- Can be combined with other modules of the COCO system (Valley, Brooks, Cascades)- Two toggle switches for distributing pitch and sync signals between oscillators within a COCO system as well as selectable clock source per section- Power consumption: 35mA (+12V) / 25mA (-12V)- Width: 10 U- Depth: 25 mm
Compact through-zero oscillator, pitch control and three-position switch for tuning over 10 octaves- Switchable LFO mode- FM input with attenuator- Hard and soft sync inputs- Outputs for square, sine, sawtooth and triangle- Can be combined with other modules of the COCO system such as Canyon Valley ...(+)
Compact through-zero oscillator, pitch control and three-position switch for tuning over 10 octaves- Switchable LFO mode- FM input with attenuator- Hard and soft sync inputs- Outputs for square, sine, sawtooth and triangle- Can be combined with other modules of the COCO system such as Canyon Valley Cascades- Current requirement: 30mA (+12V) / 15mA (-12V)- Width: 4 HP- Depth: 25mm
Analog multimode filter- Resonant up to self-oscillation- Separate outputs for lowpass, bandpass and highpass- Lowpass and bandpass switchable between 24 dB and 12 dB slopes- Integrated VCA for the lowpass output- 2 Audio inputs, one of them with gain control- M input with bipolar attenuator- With s...(+)
Analog multimode filter- Resonant up to self-oscillation- Separate outputs for lowpass, bandpass and highpass- Lowpass and bandpass switchable between 24 dB and 12 dB slopes- Integrated VCA for the lowpass output- 2 Audio inputs, one of them with gain control- M input with bipolar attenuator- With self-oscillation playable over approx. 4 octaves via 1 V/oct. input- Resonance CV input- Current consumption: 35 mA (+12 V) / 35 mA (-12 V)- Width: 8 HP- Depth: 25 mm
After Later Audio Razor; Eurorack module; Dual Multimode Filter; for each channel: manual controls for filter frequency, resonance, drive/wavefolfer and mode (filter characteristics); filter mode morphable from lowpass over bandpass to highpass; adjustable signal routing (filter 1/2 independently, p...(+)
After Later Audio Razor; Eurorack module; Dual Multimode Filter; for each channel: manual controls for filter frequency, resonance, drive/wavefolfer and mode (filter characteristics); filter mode morphable from lowpass over bandpass to highpass; adjustable signal routing (filter 1/2 independently, parallel or serial); switchable filter-link; CV inputs for drive, mode and frequency (1V/Oct.); CV inputs for frequency, resonance and routing, each with attenuverter; signal input/output per channel and mixed main output; power consumption: 150mA (+12V) / 140mA (-12V); width: 18 HP; depth: 25 mm