| t.akustik : Producer Set L Premium
|
See all t.akustik
Description from Thomann :
13x t.akustik Highline A1 Silver Spruce Absorber Set
-
Optimises room acoustics
-
Main frequency range: approx. 400 to 3150 Hz
-
Material: Polyester acoustic foam
-
Flame retardant in accordance with FMVSS 302, Burning rate: < 100 mm/min
-
Dimensions per absorber panel (W x D x H): 600 x 600 x 70 mm
-
Colour: Anthracite/Silver Spruce
-
Set content: 4 Absorber panels
10x t.akustik Diffusor Manhattan GR eps set Diffuser Acoustic Elements
-
Made of hardened EPS foam
-
For optimising room reflections and room sound
-
Suitable for recording studios, radio stations, home recording, and hi-fi rooms
-
Effective range: Approx. 900 - 3,250 Hz
-
Easy assembly and disassembly
-
Dimensions: 600 x 600 x 150 mm
-
Box contains 2 units as a kit including assembly instructions
-
One kit consists of 13 single elements
-
Colour: Graphite
20x t.akustik Highline CBT1 Silver Spruce Corner Bass Traps
-
Absorber for optimizing room acoustics
-
Especially suitable for the absorption of low-frequency sound waves
-
Material: Polyester acoustic foam
-
Main frequency / effective range 80 to 1000 Hz
-
Flame-retardant according to FMVSS 302 Burn rate <100 mm / min
-
Dimensions: 370 x 370 x 600 mm
-
Colour: Anthracite / silver spruce
-
Shipping quantity: 2 Pieces
Thomann Hand-Kartuschenpistole Hand sealant gun
-
For t.akustik acoustic glue in 310 ml cartridges (not included, must be ordered separately)
-
Hexagonal plunger rod
-
Red lacquer finish
22x t.akustik Contact Glue Acoustic Adhesive
-
For acoustic convoluted, pyramids and basotect
-
Solvent-free
-
Elastoplastic
-
Single-component special polymer adhesive
-
Fast-curing and more universal than structural and assembly adhesives
-
Especially for the punctual and all-over adhesion of soundproofing and acoustic elements made of foam in particular melamine and polyurethane foam
-
Adheres to customary construction substrates such as concrete, plaster, masonry, cement and wood
-
310 ml/ 490 g Cartridge
-
For 0.5 m² to 3 m² depending on the substrate and adhesive technology (punctual/ all-over)
-
Note: Working temperature + 5° C to + 50° C
-
Storage: Cool and dry at + 5° C to + 25° C
-
Skin building time: 10 - 15 min
-
Colour: White
-
Consistency: Pasty
-
Base: Polymer dispersion
-
Spec. mass: Approx. 1.58 g/cm
-
Protect from frost and heat
-
Suitable hand-held cartridge gun: Article Nr. 417630 (not included)
-
New follow-up product: Article Nr. 481723 (not included)